Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose Belgard Construction
We provide Belgard repair in Austin: paver patios, driveways, retaining walls, and outdoor living spaces. What separates our Belgard work from the guy with a truck and a tamper is that we rebuild failed installations. We’ve excavated enough sinking Catalina Slate patios in Mueller, Bouldin Creek, and Tarrytown to know that Austin’s expansive clay doesn’t care how pretty the paver is. It cares whether the base was built right. We’re not affiliated with or authorized by Belgard. We’re simply the crew Austin homeowners call when a Belgard project needs to be done correctly, or corrected. Call (409) 834-4854 for a free estimate.
Why Trust Sawyer Remodel Austin for Your Belgard Construction?
Luca Romano, owner of Sawyer Remodel Austin, grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending two decades on everything from slab foundations to full kitchen gut-outs. That foundation work matters here. Belgard pavers fail almost never because of the paver itself. They fail because of what’s underneath. Luca reads a failed paver installation the way a mechanic reads an engine knock: the low spot tells you where the water pooled, the lippage tells you how the base settled, and the joint washout tells you whether the drainage plan ever existed. We’ve been working Austin jobs for years, with finished work throughout Bouldin Creek and beyond. Measure twice, cut once – then we actually build the thing.
Every Belgard job runs under The Relay Visibility Guarantee. You get a written price before work starts, a live arrival time, and photo updates before and after. No change orders at the door. No invoice surprises. And the 365-Day Done Right Promise backs the install in writing: if it’s not done right, we make it right.
Styles & brands we work with
Common Belgard Construction Problems We Fix in Austin
- Paver settling and lippage from limestone base erosion. Belgard Catalina Slate and Urbana Stone pavers look beautiful the day they’re installed. Two years later, after Austin’s heavy spring downpours saturate expansive clay, the limestone base washes out underneath and the pavers start to sink. You’ll see trip-hazard lips between adjacent pavers and low spots where water pools after rain. This is the most common Belgard failure in Austin, and it’s almost always a base problem, not a paver problem.
- Efflorescence blooming on unsealed pavers near sprinkler overspray. That white, chalky film on Belgard pavers is efflorescence – mineral salts migrating to the surface as water evaporates. In Austin, it’s driven by hard water from sprinkler overspray hitting unsealed pavers, especially on the west and south sun-exposed sides of a patio. Catalina Slate’s textured surface makes it particularly prone to trapping those salts.
- Polymeric sand joint washout on sloped patios. Belgard pavers rely on polymeric sand in the joints for interlock and weed resistance. On Austin lots with slope – common in the Hill Country and Westlake – heavy runoff channels water across the patio and washes the joint sand out in sheets. Once the sand goes, the pavers start shifting laterally, and the whole surface begins to rack.
- Retaining wall block face spalling near gutter downspouts. Belgard Weston Stone wall block is concrete. Repeated wet-dry cycles – especially in winter when moisture soaks in and freezes – cause the block face to flake and chip. We see this constantly at downspout discharge points where water pounds the same section of wall every time it rains. The fix isn’t just replacing the block; it’s redirecting the water.
- Diamond Pro paver grid failures from improper compaction. Belgard Diamond Pro is a heavier-duty paver meant for driveways. But we’ve pulled up Diamond Pro driveways in East Austin where the installer skipped proper compaction on the subgrade. The grid held together fine – the ground underneath didn’t. You get ruts forming in the wheel paths within two or three seasons.
Belgard Parts & Our Repair-vs-Replace Approach
We source OEM Belgard products directly from local Austin hardscape suppliers. Matching color blends matters. Belgard runs color lots, and a Catalina Slate paver ordered six months apart from a different production run can look noticeably different in the wrong light. So when a client needs a patio extension or a spot repair, we always match against the existing install, not just the catalog name. But here’s where we’re straight with you: Kyle Belgard service clients hear this too-point repairs on a failing base are throwing money at a symptom. If a Belgard patio is sinking because the original installer used two inches of base over clay, replacing four pavers won’t fix the problem. The whole base needs reconstruction. We’ll tell you that on the first visit, not after three failed patches. When replacement is the honest call, we price it in writing before any work starts. Call (409) 834-4854 if you’re not sure which situation you’re in.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the site with you, identify the Belgard product line and its specific failure mode, and measure the affected area. We check for drainage problems, downspout discharge points, sprinkler overspray, and base depth if we can access an edge. You get a written diagnosis, not a hand-wave.
- 2
Repair or rebuild plan. If the base is sound, we quote the repair – usually joint sand replacement, paver re-leveling, or block replacement with matched Belgard units. If the base is failing, we quote a full excavation and rebuild. Either way, the price is written before we start. No surprises.
- 3
Excavation and base reconstruction (when needed). For a rebuild, we dig down to native soil, install geotextile separation fabric to stop clay from mixing into the base, lay angular limestone in compacted lifts, and level the surface. This is the part that determines whether your Belgard patio lasts five years or twenty-five.
- 4
Installation and joint work. We re-lay the Belgard pavers – whether it’s the existing Catalina Slate units being reinstalled or new product – and sweep in fresh polymeric sand. Joints get compacted and activated properly so they actually lock.
- 5
Test and walkthrough. We run water across the surface to confirm drainage, check for lippage with a straightedge, and walk the finished project with you before we call it done. You get photo updates throughout, and the work is covered by our 365-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Austin
We work with Belgard Catalina Slate pavers, Urbana Stone pavers, Weston Stone wall block, and Diamond Pro paver grids. Catalina Slate is the Belgard product we see most often in Austin patios and pool decks. Urbana Stone shows up a lot in driveway applications and larger outdoor living areas. Weston Stone wall block is common in retaining walls and raised planter beds on sloped lots. Diamond Pro handles driveway duty when the client wants a paver driveway that can take real vehicle weight. We stock joint sand, edge restraints, and base materials locally, and we source pavers and block from Austin hardscape suppliers to keep turnaround tight.
We Also Service These Brands
While Belgard is a core part of our outdoor work, Sawyer Remodel Austin also offers our General Contractor services. We install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your Belgard patio is part of a bigger outdoor project – or your kitchen needs work while we’re at it – we handle the whole scope.
FAQs – Belgard Construction Service in Austin
Because Austin’s expansive clay soil moves, and the base underneath your pavers wasn’t built deep enough to handle it. The clay shrinks during drought and swells after heavy rain. If your original installer laid two or three inches of base directly on clay, that base erodes and shifts within a few wet-dry cycles. The pavers on top aren’t failing – they’re just going along for the ride. The permanent fix is excavation, geotextile fabric, and a proper angular limestone base. If you’re seeing low spots or trip hazards, call (409) 834-4854 for a free diagnosis.
Yes, usually. We source OEM Belgard pavers from local Austin suppliers and match against your existing color lot as closely as possible. Some color drift happens between production runs, so we’ll pull samples and lay them next to your existing surface in daylight before any work starts. You approve the match before we install. Call (409) 834-4854 and we’ll bring samples to the site.
Efflorescence gets removed with a proper efflorescence cleaner, not a pressure washer blast that can etch the paver surface. But the bigger question is where the water is coming from. In Austin, it’s usually sprinkler overspray or a downspout that’s saturating the same area. We fix the water source, clean the pavers, and seal them so the salts stop migrating. If you just clean and seal without fixing the water, the efflorescence comes back in a season. Call (409) 834-4854 for an estimate.
If the pavers are shifting and the joints keep washing out, you likely have a base problem, not a joint sand problem. Re-sanding the joints on a base that’s moving is a temporary fix that’ll fail again after the next heavy rain. If the pavers themselves are intact, we can often excavate, rebuild the base properly, and reinstall the same units – sometimes that’s cheaper than a full replacement. If the pavers are cracked or worn, replacement makes more sense. We’ll tell you which one you need and give you a written price either way. Call (409) 834-4854 for an assessment.
Yes. Every Belgard installation we do is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right. That’s in writing on every project. We also honor the manufacturer’s product warranty where it applies. But the key thing is the base. If we build the base correctly the first time, you shouldn’t need a warranty claim. If something does go wrong, you call one number and we come back.
Belgard paver patio installation in Austin typically runs $3,500 to $11,000 depending on square footage, base conditions, and access. Belgard paver driveway installation typically lands between $7,000 and $18,000. Here’s how those break down:
| Project | Price Range |
|---|---|
| Belgard Paver Patio Installation | $3,500 – $11,000 |
| Belgard Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement (Belgard pavers) | $5,000 – $14,000 |
These are Austin market ranges. Your exact number depends on the size of the site and what’s underneath it. Call (409) 834-4854 for a free, written estimate – the price we quote is the price you pay.
Book Your Belgard Service in Austin, TX
If your Belgard patio is sinking, your driveway joints are washing out, or you’re planning a new paver project in Austin or nearby, call (409) 834-4854 for Leander Belgard service. We’ll schedule a free on-site estimate, diagnose what’s actually happening, and hand you a written price before any work starts.
Written by Luca Romano, Owner at Sawyer Remodel Austin, serving Austin since 2005.
