A Sawyer company - serving Austin, TX
A new rear addition with a vaulted beamed ceiling and tall windows

Abodu Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Austin
A finished backyard cottage with a small covered porch
A single-story rear room addition with tall windows and a new patio
A home office with a built-in desk and shelves
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A remodeled kitchen with painted cabinets and a farmhouse sink
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Abodu Fence Installation: The Austin Owner’s Guide

Abodu fence installation in Austin typically runs $3,500 to $9,000 for a full perimeter install, with most jobs landing between $4,500 and $6,500 depending on linear footage, gate count, and post setting conditions. We stock Abodu panel spacing hardware, kickboards, and post caps on our trucks, so most fence installs are done in one to two days once materials are confirmed. The failure signs owners usually call about first: gates sagging past the latch, kickboards pulling away at the base, or panels that rattle in high wind because the post spacing drifted.

Call (409) 834-4854

If you’re reading this, you’ve probably got an Abodu fence that’s already showing age, or you’re planning an install and want it done right the first time. Either way, you’re in the right place. We’re Sawyer Remodel Austin, and unlike a handyman who guesses at post depth, we know exactly how Abodu fences handle Central Texas clay, cedar pollen rot, and the freeze-thaw cycles that wreck shallow-set posts. Luca Romano runs our crew, and he learned the trade at Los Angeles Trade-Technical College before spending two decades swinging hammers on everything from slab foundations to full kitchen gut-outs. The same discipline applies here: measure the run, check the grade, set the posts deep, and you won’t be back next spring fixing a tilting panel.

Which Abodu Models This Applies To

A wide opening with a new beam where the kitchen wall was removed

Abodu fence systems come in a few panel configurations, and the install approach changes depending on which one you have. The two most common in Austin are the standard 6-foot privacy panel and the horizontal slat panel. Both use a post-and-panel system, but the horizontal slat version has tighter mounting tolerances because the slats visually expose any post drift. If one post is even a half-inch out of plumb, the whole run looks wavy at the top line. Standard privacy panels hide that drift better, but they fail at the kickboard seam instead.

How to identify what you have: check the inside face of an end panel for a stamped tag or printed label, usually on the lower rail. If the tag is gone, measure the panel width. Abodu panels come in 72-inch and 96-inch widths. A 96-inch panel needs posts set at 8 feet on center with no more than a quarter-inch variance over the run. We match that spec because the panel clips are not forgiving. For replacement hardware, Abodu uses a proprietary clip bracket that holds the panel to the post. We stock genuine Abodu clips, but we also carry aftermarket equivalents from manufacturers that match the bolt pattern exactly. The aftermarket clips are usually $8 to $14 less per bracket, and we’ll tell you upfront which one makes sense for your run.

One more thing worth knowing: Sawyer Remodel Austin is an independent service provider. We’re not affiliated with Abodu directly, which actually works in your favor. We don’t have to push a corporate parts list. If a generic post cap looks better and costs less, we’ll tell you.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Abodu Fence Installation Is Failing

  • Gates sagging past the latch. This is almost always a hinge-side post that wasn’t set deep enough or wasn’t backfilled correctly in Austin’s expansive clay. When the clay swells after rain, it pushes the post out of alignment; a year of that and the gate swings into the strike plate instead of through it.
  • Kickboards pulling away at the bottom rail. The kickboard is the first board to rot because it sits closest to soil moisture and sprinkler overspray. Once the board pulls, it exposes the panel’s lower frame to water, and the panel starts to bow from the bottom up.
  • Panels rattling in wind. If you can shake a panel with one hand, the post clips have worn or the panel-to-post gap has widened. High winds in the spring, especially through exposed yards in the Mueller area, will keep flexing the panel until the clip fails entirely.
  • White streaking or black spotting at the post bases. That’s efflorescence and mildew from constant moisture contact. It’s a sign the post was set below grade without proper drainage gravel, or that the concrete collar is holding water against the post.
  • Horizontal slats sliding or dropping out of the frame. The slats are held by friction-fit channels. In dry, hot stretches of July, the material contracts enough that slats can slide a quarter-inch. If they slide more than that, the frame was installed with too much tolerance.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A garage converted into a guest room and home office

For an Austin Abodu fence install, here’s the honest price range:

  • Partial panel replacement (1-3 panels, existing posts reuse): $450 to $900 total, including panel material, new clips, and labor.
  • Post reset or single post replacement: $250 to $500 per post, depending on whether we can reuse the concrete collar or need to dig a new footer.
  • Full perimeter install, 50-75 linear feet: $3,500 to $5,500, including posts, panels, kickboards, and one walk gate.
  • Full perimeter install, 75-120 linear feet: $5,500 to $9,000, including posts, panels, kickboards, and a double drive gate if needed.

What drives the spread is post depth. Austin code wants fence posts set 18 to 24 inches deep, and our area has limestone outcroppings that can turn a standard auger day into a rock bar day. If your yard sits on ledge, the dig is slower. That’s not us padding the number; that’s the reality of Bouldin Creek and the hills west of MoPac. Every price we quote is written, line-itemed, and fixed before we start. No change orders after we break ground. And if we install it, we warranty the work for a full year under our 365-Day Done Right Promise. If a post shifts or a panel pulls loose in that window, we’re back to fix it at no charge.

DIY or Call Us?

Here’s where we’d tell you to save your money and where we’d tell you to pick up the phone. Check the clips yourself: if a panel is loose, tighten the bracket screws with a #2 square drive. Check the gate latch alignment: a quarter-inch adjustment on the strike plate is a five-minute fix. Those are owner-level jobs.

But setting posts in Austin clay is not a weekend project. If the post is leaning, the answer is not a strap and a prayer. It’s pulling the post, checking the footer depth, and resetting it with drainage gravel so the next wet spring doesn’t push it out again. That requires an auger, a level, a line string, and a good back. We have all four. Call (409) 834-4854 if your posts are moving or if you’re planning a full run. We’ll give you a written price before any work starts, and you’ll know exactly who’s showing up and when. Measure twice, cut once, then we actually build the thing.

FAQs

A second-story addition that matches the existing roofline

Getting started with Sawyer in Austin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Austin team

A local crew that works across Austin and the towns around it, to the same written standard as every Sawyer location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Austin? Licensed & insured · Free written quotes response · free estimates
Call (409) 834-4854
Local Service Coverage

Request a Free Estimate in Austin

Tell us what you need - Sawyer Remodel Austin responds fast. No obligation.

By requesting your free estimate, you agree to our Privacy Policy and agree that you may be contacted through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch