Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Austin Owner’s Guide
If you’re searching for CGI bathroom remodeling in Austin, you’re likely holding a failed part or staring at a remodel that’s gone sideways. The typical installed price for a CGI-compatible bathroom remodel in Austin runs $9,000 – $28,000, and yes, we can usually get started within days, not weeks. Most homeowners discover the problem the hard way: a shower valve that won’t stop dripping, a cabinet frame that’s delaminating from humidity, or tile work that was never waterproofed correctly behind CGI panels. We stock the common failure points on our trucks and will match every CGI part to your exact model before we cut a single hole.
And to be clear upfront: Sawyer Remodel Austin is an independent service provider. We’re not affiliated with CGI, but we’ve repaired and rebuilt enough CGI bathrooms across Austin to know exactly how their systems fail, which parts interchange, and what it takes to make the fix last. We also handle parts and finishes from KraftMaid, Cambria, and Silestone when the scope expands beyond the original CGI components.
Which CGI Models This Applies To
CGI bathroom components span several product generations, and the compatibility gotcha is real: original CGI shower and tub surrounds from the 2000s and 2010s were built around specific wall panel dimensions, usually 60-inch and 60-1/8-inch stud bays. If you try to swap in a panel meant for a true 60-inch opening into a 60-1/8-inch rough-in, you’ll either crack the flange or end up with a gap that wicks water for years before you notice the damage. We measure stud-to-stud and panel-to-panel before we order anything, because we’ve seen the 1/8-inch difference ruin afternoons.
What fails first: the acrylic or fiberglass shells crack at the corner seams, the integrated soap dishes and shelves snap off, and the valve bodies behind the walls corrode from Central Texas hard water. The OEM parts work fine but they’re priced like the manufacturer knows you’re stuck. Quality aftermarket equivalents, especially solid-brass valve stems and upgraded cartridge assemblies, often outperform the original CGI parts for less money. We’ll walk you through which parts make sense to buy OEM and which ones you should let us source aftermarket, based on what’s actually behind your wall.
Styles & brands we work with
Signs Your CGI Bathroom Remodeling Is Failing
- Persistent drip at the tub spout or showerhead. Hard water deposits eat at the valve seats and cartridge seals. You replace washers, the drip comes back in three weeks. The fix is a new valve body or cartridge assembly, not another washer.
- Soft spots or staining at the panel seams. Water is getting behind the surround where the panels meet. By the time you see the stain on the outside, the framing behind it has been wet for months. In Austin’s humid summers, that means mold is already in the conversation.
- Snapped soap dish or shelf that was once integrated into the wall. These are bonded to the panel at the factory. When they break, they usually take a chunk of the panel with them, which means the whole panel has to come out or be patched with a repair kit that never quite matches.
- Crumbling or discolored caulk that keeps failing. This one trips people up, because recaulking feels like a fix. But if the caulk fails repeatedly in the same spot, the panels have shifted, and the movement joint is now wider than any caulk bead can bridge.
- Water on the floor outside the shower that isn’t from splashing. That’s a failed waterproofing layer behind the tile or surround. The visible surface looks fine. The floor joists underneath tell a different story.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CGI bathroom remodel in Austin runs $9,000 – $28,000. A smaller bath, meaning a tub-shower surround swap and a new vanity, lands around $5,000 – $12,000. The spread comes from what’s behind the wall: if we open it up and the framing is sound, you’re at the low end. If the studs are rotted and the subfloor needs sistering, the price climbs fast because we’re now doing structural repair, not just cosmetics.
Every quote is written, line-itemed, and in your hands before any work starts. The price you approve is the price you pay. No change orders, no “we found something unexpected” upsell, no surprises at invoice time. We also carry the 365-Day Done Right Promise: if something we installed fails within a year, we come back and make it right at no charge.
| Scope | Typical Austin Installed Range |
|---|---|
| Full bathroom remodel (CGI-compatible) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement (surround or pan) | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
Parts and labor are split on the written invoice. We don’t bury the part cost in a lump sum and call it “materials.” You see what the CGI-compatible panel or valve costs, what the labor costs, and what’s warranty-backed. Manufacturer-backed brands like Kohler and Toto are available when you want to upgrade fixtures while the wall is open.
DIY or Call Us?
Here’s where Lucas draws the line, and it’s the same line he’d draw on a job site: you can safely identify the problem, but the fix behind a CGI shower wall is not a weekend project. If you’re pulling valve cartridges, you’re dealing with shutoffs and plumbing that can flood a bathroom fast if a fitting lets go. If you’re pulling panels, you’re exposing framing that was never meant to see daylight, and once it’s open, the waterproofing has to be rebuilt correctly or you’ve traded a leak for a worse leak.
Call us before you open the wall, not after. We’ll look at photos, tell you what we think the part is over the phone, and give you a written price before we schedule a single hour of work. The number is (409) 834-4854.
FAQs
In the real world, most CGI tub and shower surrounds in Austin last 12 to 18 years before they start failing at the seams or the integrated shelves break. The hard water and high summer humidity shorten that lifespan compared to other markets. If the surround was never properly waterproofed at installation, it can fail in half that time. Call (409) 834-4854 and we’ll tell you if what you’re seeing is normal wear or a problem worth fixing now.
Sometimes, yes, if the crack is small and not at a seam or a corner. We use a two-part structural adhesive and color-matched patch that bonds to the existing shell. But if the crack runs through a seam or the panel has pulled away from the studs, patching is a band-aid that buys you months, not years. We’ll be straight with you about which one you’re looking at, and the replacement quote is free either way.
A tub-shower surround swap usually takes three to four working days, including demo, any framing repair, waterproofing, and finishing. A full bathroom gut-out with vanity, flooring, and fixtures runs one to two weeks. We give you a written schedule before the first tool is picked up, and we hit it. Call (409) 834-4854 if you have a date in mind, and we’ll tell you whether it’s realistic.
We stock the common failure points on the truck: valve cartridges, shower arms, drain assemblies, corner seam kits, and the trim pieces that get brittle with age. For anything panel-specific to your model, we order it through our supplier network, usually with two to three day turnaround in Austin. You never need to source parts yourself. We handle the ordering, the matching, and the install. Call (409) 834-4854 and tell us what’s failing; we’ll tell you if it’s already on the truck.
Written by Luca Romano, Owner, Sawyer Remodel Austin at Sawyer Remodel Austin, serving Austin and nearby areas.
