Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Austin, TX | Sawyer Remodel Austin
We provide independent CWS cabinet and construction service across Austin, with no manufacturer affiliation or authorization. The one thing that makes our CWS work here different: we know exactly how Austin’s clay soil, humidity, and pier-and-beam foundations stress these cabinets, and we fix the failure instead of just the symptom. Call (409) 834-4854 for a free estimate.
Why Austin Residents Choose Us for CWS Service
Luca Romano built Sawyer Remodel on a simple rule from his trade school days in Los Angeles: the cut has to be right the first time, because fixing sloppy work costs everybody money. That rule drives every CWS job we take in Austin. Our crews have spent years working inside homes across Bouldin Creek, East Austin, and the older central neighborhoods, tearing out and rebuilding CWS-finished kitchens and baths on limestone and shifting clay. We know which CWS products hold up to Austin’s humidity and which don’t.
Because we’re independent, we’re not tied to any manufacturer’s warranty or authorization. That means we can tell you the truth about a failing cabinet box, and we can recommend the right fix, whether that’s OEM parts or better hardware that won’t fail the same way twice. You’ll get a written price before we touch a tool. You’ll know who’s coming to your door, when they’ll arrive, and what the job costs. That’s The Relay Visibility Guarantee, and it’s how we’ve worked since 2005.
Styles & brands we work with
Common CWS Construction Problems We Solve in Austin
Here’s what we see most often in Austin homes with CWS cabinets.
- Thermofoil peeling at edges and seams. Austin’s hot, humid summers push moisture into CWS Denver thermofoil doors, especially above dishwashers and ranges. The glue bond fails at the edge, then the film lifts and cracks. We match and replace the affected doors when the cabinet box is still sound.
- Drawer box joints separating on plywood boxes. In pier-and-beam homes, foundation movement racks the cabinet frame. Over time, dovetail joints and staples start to pull apart, and the drawer won’t sit square. We re-set and reinforce the box, then re-align the glides.
- Soft-close hinge screws stripping out of MDF doors. Painted MDF CWS doors take screws fine at the factory, but Austin’s humidity swells the fiber and daily use works the screw loose. We re-drill with steel-sleeve anchors or switch to Blum hinges sized for MDF.
- Doors binding after slab foundation movement. Austin’s expansive clay shrinks and swells through the dry-wet cycle. On slab homes, the cabinets stay put while the floor heaves. Toe kicks drop, doors rub the counter, and the whole run needs shimming and re-setting.
- Uneven cabinet alignment on aging pier-and-beam floors. East Austin bungalows from the 1960s are the worst offenders. The floor walks, the cabinet walks with it, and doors refuse to close. We level the base cabinets with steel plates and re-hang the doors to a true line.
CWS Service in Austin: What Local Conditions Mean for Your Equipment
Austin’s East Side bungalow belt has a high concentration of 1960s-era slab-on-grade homes where original CWS cabinets were mounted directly to drywall over shifting clay. We routinely find toe kicks that have dropped 3/8 inch on one side, causing the CWS doors to rub the counter. That kind of movement is invisible in newer North Austin suburbs, where the soil was engineered fill and the slabs are reinforced, but it’s the defining CWS service call in 78702 and 78721. In those older East Austin homes, the original installers set cabinets level at the time, but no one accounted for six decades of clay shrink-swell. The fix starts with re-shimming the base cabinets to true level, then checking every hinge, drawer glide, and door gap before anything gets replaced.
CWS Models & Products We Service in Austin
Our crews work on the full CWS line: the Denver door style in thermofoil and painted MDF, the Hartford full-overlay maple doors, the plywood box cabinet lines with dovetail drawers, and the RTA series. For hinges, drawer glides, and touch-up kits, we use OEM CWS parts when they’re available and in good supply. When CWS parts are backordered, or when the original hardware is prone to repeat failure, we don’t hesitate to substitute Blum or Grass hardware. For cabinet boxes or doors that have lost structural integrity from Austin humidity or foundation movement, we recommend replacement over rebuilding the box. We stock common CWS-compatible hinges, glides, and touch-up kits for fast turnaround across Austin.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Austin
| Service | Price Range in Austin |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation (Quartz/Granite) | $2,000 – $6,500 |
What drives the cost: cabinet count and door style, whether we’re re-using or replacing boxes, countertop material, and the amount of floor leveling required. A free estimate includes a full inspection of your existing CWS cabinets, measured and written line-by-line, before you approve anything. Call (409) 834-4854 and we’ll put the price in writing.
Serving Austin, TX - Our Local Coverage Area
We’re serving Austin, TX and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Austin
Why do my CWS cabinet doors stop closing evenly in my Austin pier-and-beam home?
Because the floor under the cabinets is moving. Pier-and-beam homes in Austin sit on clay that shrinks in summer drought and swells after rain. The joists sag, the cabinets rack, and the doors bind. We level the base with steel shims, re-align the hinges, and the doors close again. Call (409) 834-4854 if you want us to check yours, estimates are free.
Can you match a CWS thermofoil door that’s peeling in my kitchen?
Yes, if the cabinet box is sound. Austin’s humidity peels thermofoil fast, especially over the dishwasher and range. We match the door profile and finish with OEM or premium aftermarket equivalent, then re-hang and adjust. If the peeling runs through multiple doors or the MDF core is swollen, replacement makes more sense. Call (409) 834-4854 for a door-by-door quote.
Do you recommend CWS RTA cabinets for an Austin slab foundation?
For newer slab homes with stable soil and engineered fill, RTA cabinets work fine when assembled correctly. For older Austin slabs on expansive clay, we recommend plywood boxes over MDF and a full leveling step before the first cabinet goes in. That’s the difference between doors that close and doors that rub in 78702.
What’s the first thing you check when a slab-foundation kitchen has CWS doors rubbing the counter?
We check the toe kick. In East Austin slab-on-grade homes from the 1960s, the toe kick drops first when clay movement shifts the floor. If it’s down 3/8 inch on one side, we shim the base cabinets level, then re-hang the doors. That fixes most rubbing without replacing a thing.
Why does my CWS soft-close hinge keep loosening on my painted MDF doors?
MDF holds a factory screw fine until Austin’s humidity swells the fiber and daily use works the thread loose. Then the hinge sags and the door won’t close. We re-drill with steel-sleeve anchors or switch to Blum hinges sized for MDF. One fix, not a repeat call. Call (409) 834-4854 and we’ll come take a look.
Service Areas Near Austin
Our crews cover Austin and the surrounding cities. We do CWS service in Leander for homes in the north corridors, CWS service in Kyle for the southern suburbs, plus Lakeway, Jollyville, and Lockhart. That covers most of Travis, Williamson, Hays, and Caldwell County CWS owners.
Book Your CWS Service in Austin Today
If your CWS cabinets are peeling, binding, or just not closing right, we’ll send a background-checked crew with a live arrival time and a written price. Call (409) 834-4854 to schedule your free estimate.
Written by Luca Romano, General Contractor - Austin, serving Austin since 2005. Measure twice, cut once, then we actually build the thing.
