Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Fence Installation: The Austin Owner’s Guide
A Techo-Bloc fence installation in Austin typically runs between $3,500 and $9,000 for a full perimeter, including materials, concrete footings, labor, and haul-away of the old fence line. We stock Techo-Bloc-compatible fence components and can usually have a crew scheduled within a week of the initial site visit. Most owners discover a problem the same way: a post starts leaning after heavy rain, a gate drags against the ground, or a panel cracked at the mounting point because the original install didn’t account for Austin’s clay soil movement.
Which Techo-Bloc Models This Applies To
Techo-Bloc fences in Austin fall into a few recognizable families, and the install method changes depending on which one you have. The most common is the Bastion precast concrete panel system, which uses interlocking concrete sections that slot between pilasters. Then there’s the Rafino post-and-panel line, and the more decorative Rocka and Borealis landscape walls that often get repurposed as low fence borders. The compatibility gotcha most owners miss: Techo-Bloc panels are manufactured in metric dimensions, so a standard 6-foot American fence panel will not drop into a Bastion post. If your original installer used generic posts with Techo-Bloc panels, or vice versa, that’s usually the first point of failure.
OEM Techo-Bloc parts are worth the cost for load-bearing posts and gate hinges because the concrete mix is engineered for the weight. For non-structural fill panels and decorative caps, quality aftermarket equivalents from local Austin stone yards work fine and can save 20 to 30 percent.
Styles & brands we work with
Signs Your Techo-Bloc Fence Installation Is Failing
- Post lean after rain. Austin’s blackland prairie clay expands when wet and contracts during droughts. A post set without a deep enough concrete footing will shift within a season or two.
- Gate dragging or sticking. The gate frame was hung before the ground settled, or the hinges weren’t rated for the weight of a concrete panel. You’ll see scraping marks at the latch side.
- Hairline cracks at panel corners. This is a tension failure. When a panel can’t flex with soil movement, it cracks at the thinnest point, which is almost always the corner near the post.
- Water staining or efflorescence. White chalky residue on the concrete means water is wicking through the panel. In Austin’s freeze-thaw cycles, trapped moisture expands and spalls the surface.
- Loose pilaster caps. Caps pop off when the post shifts underneath them. If you can lift a cap by hand, the post below it has moved.
Replacement Cost & What’s Included
For Austin homeowners, a full Techo-Bloc fence replacement lands between $3,500 and $9,000, and the spread comes down to three things: total linear footage, whether we’re reusing existing footings or pouring new ones, and whether your specific panels are still in production or need to be matched from local inventory. Every quote from Sawyer Remodel Austin includes the written price before work starts, the concrete, the panels or posts, the hardware, equipment time, and haul-away. The number we put in writing is the number on the invoice. Our 365-Day Done Right Promise applies to every fence install: if it’s not done right, we make it right, in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
A homeowner can safely check for the obvious stuff: wiggle a post, inspect the gate hinges, look for fresh cracks after a rain. What you shouldn’t attempt is resetting a concrete post or lifting a Techo-Bloc panel by yourself. A single Bastion panel weighs over 100 pounds, and a toppled post will crush a foot or a hand faster than you can react. We’ve also seen DIY attempts where someone cements a post crooked, then has to break it out and start over, which costs more than the original repair. If you’re unsure whether the post is actually failing or the soil is just settling, call us at (409) 834-4854. Luca Romano can tell you over the phone whether it’s a repair or a full reset, and we’ll put eyes on it at no charge if the fix is minor.
FAQs
A properly installed Techo-Bloc fence lasts 20 to 30 years in Austin, but the concrete footings are the real lifespan factor. Posts set in clay soil with shallow footings fail in 5 to 10 years. Call (409) 834-4854 for a footing inspection and exact quote.
Yes, in most cases we can reset a single post or replace a single panel without touching the rest of the fence line, as long as the surrounding posts are still solid and level. Call (409) 834-4854 and we’ll confirm whether the damage is isolated before recommending any larger work.
A typical Austin perimeter fence replacement takes 2 to 4 working days depending on linear footage, access for equipment, and whether concrete footings need to cure before panels go up. Call (409) 834-4854 for a schedule estimate based on your specific yard.
We stock common Techo-Bloc mounting hardware, post anchors, and gate hinge kits on our trucks, and we source panels and posts directly from local Austin suppliers to match your existing color and texture. You don’t need to order anything yourself. Call (409) 834-4854 and we’ll handle the entire material list.
Contact Sawyer Remodel Austin About Your Techo-Bloc Fence
If your Techo-Bloc fence is leaning, cracking, or the gate won’t close clean, don’t guess at the cause. Call Sawyer Remodel Austin at (409) 834-4854 and we’ll schedule a free estimate, walk the fence line with you, and hand you a written price before any work begins. The Relay Visibility Guarantee means you’ll know exactly who is coming, when they arrive, and what it costs. While we’re on site, ask about our other install work, including KraftMaid cabinets, Cambria countertops, and Silestone surfaces.
Written by Luca Romano, Owner, Sawyer Remodel Austin at Sawyer Remodel Austin, serving Austin and nearby areas.
